Stock brake pads for:Exige Mk3 V6Exige Mk3 400+Evora Mk1 naEvora Mk1 S3-Eleven

Fits Evora/ Exige V6, only front axle!

Now our Ko-Bra 4-4 braking system is available for the Lotus Evora, too. We use a 362mm (350mm Series) Brake disc on the front and a 343mm (Series 330mm) brake disc on the rear axle of the quality manufacturer PFC (Performance Friction Brakes) with a screwed alloy-pod. The pods are manufactured out of F52 aluminum. By using the two-part brake disc, and a larger rotor diameter, thus lower fading tendency. This all is figured without increasing the brake disc weight. The weight of the front disc is 8.3kg. (Series 9.4) at the rear discs are there 8.1kg (series). The original caliper is still used and distances with an adapter. The delivery incl. PFC brake pads front and rear. Assembly requires technical knowledge!

Now our Ko-Bra 4 braking system is available for the Lotus Evora, too. We use a 362mm (350mm Series) Brake disc on the front axle of the quality manufacturer PFC (Performance Friction Brakes) with a screwed alloy-pod. The pods are manufactured out of F52 aluminum. By using the two-part brake disc, and a larger rotor diameter, thus lower fading tendency. This all is figured without increasing the brake disc weight. The weight of the front disc is 8.3kg. (Series 9.4). The original caliper is still used and distances with an adapter. The delivery incl. PFC brake pads front. Assembly requires technical knowledge!

Replacement Friction Rotors for Kobra-Brake System   Our KoBra-Brake System is equipped with two-piece brake discs (alloy pot + friction rotors) If the rotors are worn (no slots left or cracks through the outer diameter) you have to replace it. Here in the article you can get all the available options of replacement rotors. We deliver a set for one axle (1x LH and 1x RH rotor incl. the fitting kit / bobbins. Normally you can continue with the alloy-pot that exists.   The following variants are used: a) 295mm-Rotors Use: KoBra 2 with 2pot-Standard-Caliper front for Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Fitting) b) 308mm-Rotors Use: Lotus Big Brake Kit with 4Pot-AP-Caliper as a replacemnt for the Standard-Rotor frontfor Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Bobbin-Kit) c) 313mm-Rotors Use: KoBra 4 and KoBra 4-2 with Komo-Tec-Caliper front and rear for Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Bobbin-Kit). Attention: Rotors come "dyno-bedded"! e) 343mm-Rotors FLOATED Use: KoBra 4-4 FLOATED with 4Pot-AP-Standard-Caliper front and rear for Exige V6 Range and 3-Eleven (incl. Fitting) f) 362mm-Rotors Use: KoBra 4 and KoBra 4-4 with 4Pot-AP-Standard-Caliper front for Evora (or Evora 400 rear, incl. Fitting) g) 378mm-Rotors FLOATED Use: KoBra 4-4 FLOATED with 4Pot-AP-Standard-Caliper front for Evora 400 Range (incl. Fitting) Hints: Please take car of the driving in periode (except 313mm-dyno-bedded) to be sure that everything is running well and to avoid faiding! Assembly requires technical knowledge!

This are the brake pads for our Ko-bra-System SCREWED! If you order one piece you will get a set for one axle (you may fit it in the front or in the rear). Temperature range 100 ° C to 700 ° C. Thickness 17 mm.

Ferodo DS 2500 Brakepads for Exige V6, Evora and Evora S. The DS2500-compound is aspecially developed by Ferodo for sporty usage. A constant braking in all temperatur ranges provides high safety and a disc-friendly wear pattern at the same time The friction-coefficient is µ (at 200°C to 600°C)! Ideal for road and "Soft-Racing" (without TÜV). Motorsportpart - Track use only - NO street use StVO/StVZO!

Caliper Overhaul KitsWe deliver kind of options. We deliver always a kit for one caliper(2x = one axle). The kits content all necessary inner and outer seals and bleeding nipples (except Brembo-Caliper, that is only a set of rubberseals).Note: Image used for illustration purposes only. Product may differ from that shown.

PFC-665 High Performance Brake FluidDOT4 up to 330°C for excellent high temperature performance to resist brake fade due to vapour lock. Outstanding corrosion resistance and class leading lubricity to prolong system life and enhance ABS operation.Price per bottle = 500ml (you will need ca. 1,5l for fluid-change!).