ProAlloy 60l- alloy tank for your Lotus It is very important for the engine to get fuel available always! So the tank is filled with a Typ4 FIA safety foam, and constructively with partitions reduce surging especially when cornering. While Lotus producing a tank made of steel, ProAlloy used alloy for it. Already to reduce weight, reduce rust and to prevent further contamination of the fuel and minimize the clogging of the filter. The fitting is very easy, because we use the original points. Also the standard pump of your Lotus can be used.The tank will be delivered with a mounting for the fuel pump at the original mounting points.Note: There is a possibility that the whole fuel cannot be drawn! The run down amount of fuel can therefore differ from the tank volume of the component.Motorsportpart - Track use only - NO street use StVO/StVZO!Attention: Not fittable at Exige Sport 380, Cup 380, Sport 410, Cup 430.

ProAlloy 48/54l- alloy tank for your LotusThe original part from the factory just allows you to fill up about 38l- volume, we offer you our ProAlloy-aluminum tank as an option to enlarge the reach!It is very important for the engine to get fuel available always! So the tank is filled with a Typ4 FIA safety foam, and constructively with partitions reduce surging especially when cornering. While Lotus producing a tank made of steel, ProAlloy used alloy for it. Already to reduce weight, reduce rust and to prevent further contamination of the fuel and minimize the clogging of the filter.The fitting is very easy, because we use the original points. Also the standard pump of your Lotus can be used.The tank will be delivered with a mounting for the fuel pump at the original mounting points.Note: There is a possibility that the whole fuel cannot be drawn! The run down amount of fuel can therefore differ from the tank volume of the component. Motorsportpart - Track use only - NO street use StVO/StVZO!Optional fitting: 450€ (Exige V6 about 690 €) incl. vat.

HP Fuel Pump for Elise Mk1 Rover + 340R/Exige Mk1 Using the latest turbine architecture and a very high build quality this pump unit outperforms every other pump unit available for the Elise S1. True HP Output up to 400BHP N.A Superior design architecture featuring a dual input design Rapid canister refil Low power draw modern sender unit New under arm fits both OE and Pro Alloy tanks Plug and play Quiet E85 fuel compatible 2 Year warranty DUAL INPUT DESIGN - As per the original AC Delco design the pump can take fuel from either the canister or the tank directly, or both simultaneously.Unlike eductor driven pump units, this has several advantages: -Virtually instantaneous HP output recovery from fuel starvation caused by fuel swash.Immediate recovery of the reserve canister refill cycle from empty, this is achieved by the pump itself via the refill ejector system. An eductor refill system by comparison would be stalled in this situation and unable to refill the canister until fuel enters the canister by gravity fill or swashing over the top.RAPID CANISTER REFILL - Even when supplying the entire pumps output to the engine the pump will still fill the canister from empty to full in about 6 seconds, quicker at higher fuel rail pressures and quicker still as the return fuel is added to the canister when not at full power, about 4 seconds!This is easily the fastest refill we have ever tested, as a reference the original OE pumps being around 10 seconds and the latest OE pump being about the same.It is also considerably quicker than eductor powered systems that are slow even when compared the original OE pumps. LOW POWER DRAWAt around 6-7A it uses about the same or less power than OE pump despite the massive difference in output. MODERN SENDER UNITLatest sender design, not a wire wound rheosta A new arm is supplied which will work correctly with both the OE and the ProAlloy tanks. The arm angle can be changed if preferred to adjust the reference “empty” reading of the Stack display. PLUG AND PLAYThere is nothing to change on the car or recover from the old pump unit, the new unit uses identical connectors for the fuel and electrics.New harness plugs are available cheaply for the vehicle loom if required.A new Viton tank seal is supplied and fitted. QUIETDespite the high power output these units are as quiet as OE units.

Uprated highflow airbox-system for Elise S1/S2. The perceptible increase of fresh air intake in combination with an optimised airflow reveals an improvement of torque and power-output. The intake sound gets sporty without being invasive. The housing comes in lightweight and black anodised alloy. A carbon fibre version is available at extra charge. consist of: airbox K&N airfilter inlet air hose silicone hose box to throttle The delivery excludes the throttle body