Sports-Catalyst 300cpsi-HJSfits to Lotus Emira I4-AMG. Attention: This kit is not yet available and is only intended to give you an insight into our plannings! We will communicate the exact specifications, pricing and availability as soon as it is finally available. Thank you for your understanding. No street use availability yet. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Komo-Tec KoBra-4-4-Sportbrakesystem Emira  (Front and rear axles, 378/356 mm) Now our Ko-Bra 4-4 braking system is available for the Lotus Emira, too. We use a 378mm (370mm Standard) Brake disc on the front and a 356mm (350mm Standard) brake disc on the rear axle of the manufacturer PFC (Performance Friction Brakes) with a screwed alloy-pod. The pods are manufactured out of F52 alloy. By using the two-part brake disc, and a larger rotor diameter, thus lower fading tendency. This all is figured without increasing the brake disc weight. The weight of the front disc is 9.0kg. (9.1 Standard) at the rear discs are there ___kg (10,3kg Standard). The original caliper is still used and distances with an adapter. The delivery incl. PFC brake pads front and rear. To keep it a plug'n'play-kit we decided to increase size on the rear belt just slightly because of the new handbrake-caliper. The brakeforce is great by still bigger diameter and better by using high-quality components. Additional advantages of the “floating discs” on the front axle: The new friction rings have a smaller friction surface, so that in combination with optimized brake pads we generate a higher braking capacity and at the same time better heat dissipation. Due to the lower disc temperature, the expansion and thus the unbalance are lower. This (unbalance and temperature) minimizes the transmission of the loads to the brake pot, ensures less tension in the overall system and thus also protects the wheel bearings from increased wear. The grooves serve for better cooling, the removal of the brake dust and at the same time as a wear level indicator. In contrast to the floating discs installed by Lotus in the early Cup models, PFC works with a patented fastening system in order to keep the otherwise clattering discs almost noise-free thanks to spring preload. When replacing the friction disc later, the alloy pot can be reused and only the friction ring itself has to be replaced (much cheaper than the factory discs)! Weight comparison:front:KoBra disc (FLOATED) - 9.0kgStandard disc (2-pcs) Emira - 9.1kgrear:KoBra disc - ___kgStandard disc (2-pcs) Emira - 10.3kg Sizing:front:KoBra discs: 378x32 mmStandard disc: 370x32 mmrear:KoBra discs: 356x32 mmStandard disc: 350x26 mm The KoBra 4-4 braking system consists of:2x grooved brake discs 378x32 mm FLOATED2x grooved brake discs 356x32 mmfloating alloy pots at the front, screwed aluminum pots at the backPFC sports brake pads front and rearFixing and adapter kit Assembly requires technical knowledge! TUV §19.2 approval possible inhouse.

KT sport air filter for Emira V6, easy replacement of the stock filter. This sport air filter has been specially manufactured for us KT and is therefore a custom-made product, which only we can offer.stands out with the latest filter technology, optimal filtering efficiency (up to 80 microns) with maximum airflow.The filter no longer needs to be replaced; with proper maintenance, it has an unlimited lifespan. An important aspect of the new filter material is that unlike other filters, it does not need to be oiled during cleaning, reducing the risk of errors in the mass airflow sensor, which unfortunately occurs repeatedly in the Lotus V6 models.

Emira seat badges "Lotus" and "Emira" to selectWe deliver a pair (2 pcs.)

Larini Systems is one of the world’s finest resource for high performance, classic and sports car stainless steel exhaust systems.Every Larini System is a combination of precision engineering, aircraft-grade stainless steel and elegant design. A Larini System is the natural choice for anyone looking to improve on the aesthetics, acoustics, or longevity of their current exhaust system.This system is designed for the Lotus Emira V6. It’ll bring the car alive producing more a nice and burbly noise. The system comes with an adapter which allows you to re-use the original valve. This prevents you from having any issues with check lights etc. Motorsportpart - Track use only - NO street use StVO/StVZO![Weight specification: volumetric weight for shipping cost calculation]

Emira Wiperblade1 Set will be delivered (2 pcs.)RHD on request.

Only for Emira GT4 with Alcon braking system, not street-legal!

Original Lotus hub caps for the EmiraAvailable in black/silver or yellow/green.Price per Set (4 Pcs.)

Original Lotus 20” Gloss Black Alloy Wheels with Michelin Pilot Alpin PA4 TiresOnly for Emira V6!Front tires size: 235/35R20 92WEfficiency: D, Wet Grip: C, Noise: 70 dB (two bars)Rear tires size: 285/30R20 99WEfficiency: D, Wet Grip: C, Noise: 75 dB (two bars)Please observe the speed rating. Max. 270 km/h!Photos are for illustrative purposes only. The actual product may differ from the image shown.WARNING: Clearance must be individually checked on each vehicle!

Original Lotus 20” Gloss Black Forged Wheels with Michelin Pilot Alpin PA4 TiresOnly for Emira AMG I4!Front tires size: 235/35R20 92WEfficiency: D, Wet Grip: C, Noise: 70 dB (two bars)Rear tires size: 285/30R20 99WEfficiency: D, Wet Grip: C, Noise: 75 dB (two bars)Please observe the speed rating. Max. 270 km/h!Photos are for illustrative purposes only. The actual product may differ from the image shown.WARNING: Clearance must be individually checked on each vehicle!

Original Lotus 20” Gloss Black Alloy Wheels with Michelin Sport Cup 2 Semi-Slick TiresOnly for Emira V6! Michelin Sport Cup 2 Semi-Slick Tires Front tires size: 245/35R20 95YEfficiency: D, Wet Grip: C, Noise: 70 dB (two bars)Rear tires size: 295/30R20 101YEfficiency: D, Wet Grip: C, Noise: 74 dB (two bars)Goodyear Eagle F1 Supersport Front tires size: 245/35R20 95Y Efficiency: D, Wet Grip: A, Noise: 71 dB (two bars) Rear tires size: 295/30R20 101Y Efficiency: C, Wet Grip: A, Noise: 73 dB (two bars) Photos are for illustrative purposes only. The actual product may differ from the image shown.WARNING: Clearance must be individually checked on each vehicle!

Delivery box for the Lotus Emira in body color, featuring a key compartment in the base for the spare key. A delivery box in the selected body color will be provided; the boxes shown in the title image are for illustrative purposes only! Dimensions of the model: 17x7.5x3.5 cm

Carbon Spoiler KT-Track for Emira The new lotus Emira is an impressive car with many improvements, that's not to say it can't be made a little bit better...Our first test drives with this car on road and track showed that a propper rear wing would suit the Emira not only visually but also technically. We have therefore started to determine a suitable wing profile after extensive development with CAD/CFD and have also completed the driving tests successfully. The Angel of the Wingblade is adjustable. Sizes: Wingblade approx. 125x29cm, hights from rear-clam approx. 19cm. More technical informations to follow.....The wing is TÜV compliant and can be registered. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Phase EM475 Streetfits to Lotus Emira V6. Attention: Due to high demand, please reserve an appointment early! Performance Data EM475: approx. 475 hp / 500 Nm  Technical Data (Emira V6): approx. 400 hp / 420 Nm (Factory Spec) Phase EM475 consisting of: KT-Stainless steel manifold with optimized pipe lengths for TÜV-approval Y-Pipe with special made Catalyst for TÜV-approval KT-sportsfilter Oxygen sensor extension-cable Optimization ECU-Software EM475 (ignition, injection characteristics and camshaft phase adjustment) Dyno run with performance record     CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus (ROZ98). Kit expires factory warranty to powertrain! German street use by TUV-approval is possible. The costs are to be borne by the buyer. 

Öhlins TTX Sports-Suspension for Emira V6 Öhlins top technology, which has been tested and successed for many years, is now also available for your Emira. The original suspension of the Emira certainly offers extremely attractive driving values ​​from factory side, but there is still significant potential in comfort, responsiveness and useability for the racetrack.   The TTX-Suspension-Set (twin-tube technology) ensures maximum performance, reliability and durability. Due to the high usage of aluminum components and the integration of all functions in one damper unit, the weight of the overall chassis was also kept very low, like the philosophy of Lotus.This stronger setup prevents the well-known indifferent behavior at high speeds and the tendency to roll of and ensures the necessary agility of your Lotus Emira.   The rebound and compression damping, the chassis height and the spring preload can be adjusted separately. The TTX chassis offers you a great wide of options to adjust the Emira according to your individual needs. This provides the driver an optimal balance of comfort, use on roads and the race track. Visually, it is about 15-20mm lower. The suspension kit consists of 2x front and 2x rear damper-/spring units and is supplied with all necessary installation parts. German TUV approval can be done, costs covered by buyer. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Lotus GT4-Motorsport Frontsplitter for Emira Attention: This kit is not yet available and is only intended to give you an insight into our plannings! We will communicate the exact specifications, pricing and availability as soon as it is finally available. Thank you for your understanding. No street use availability yet. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

PREORDER now and be one of the first customers to get a dustcover! No delivery appointment confirmed till now. Original Lotus Dust Cover "Evija" The Dust Indoor Cover is made of a hard-wearing black fleece-lined fabric with the Lotus logo in white, attached to the front in a striking manner. In addition, the brand logos of the respective models are attached to the sides and “For the drivers” in the rear. Tailor-made, breathable, fleece-lined stretch material The material adapts to the shape of the vehicle Unique design and lotus branding Packed in bags with Lotus branding Lotus branding on the front to identify it as a genuine product ATTENTION: Special order on customer request! No stock good, return only with deduction of 30% storage fee!

Wheels KT-7Forged for Emira Our new Forged Wheel for Emira is unique and aspecially designed for the Light-Is-Right-Philosophy of Lotus by lowering rotating masses. Set consists of:2x Rims front: 8,5 x 20"; weight: 10,5 kg/wheel (Forged Factory-Spec: 11,5 kg/wheel)2x Rims rear: 10,0 x 20"; weight: 11,3 kg/wheel (Forged Factory-Spec: 13,2 kg/wheel)So this is a total of 5.8 kgs savings! The wheel is available in silver. Motorsportpart - Track use only - NO street use StVO/StVZO! Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Original Lotus Shower Cover "Emira" The shower outdoor cover is lined and suitable as a rain cover for outdoor use. The material adapts to the shape of the vehicle. Unique design and lotus branding Packed in bags with Lotus branding Tailor-made for the models in the Emira range. Note: Previously Lotus will offer 2 Versions (black or grey). Feel free to let us know your preference if you want to.

Motorsport Manifold for Emira To help the Emira V6 something on the jumps, we offer a manifold system. This has been developed and tested on our dyno, so we have achieved very good results. The manifold is made of stainless steel and the pipe lengths individually matched to the V6 engine. The aim was to obtain an improved torque curve and also a little more peak power. The original Y-pipe is used further. We recommend using our Sportkats. The manifold is supplied polished. Also we took care of the lightweight in our newest Emira-Version! Motorsportpart - No street use! Track use only! Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components. [Volume weight]

The Tillet B10 is a carbon sport seat that perfectly matchs into the Lotus Interior!Lets take a look at some of the main benefits and improvements:EXTRA HEAD & LEG ROOMAs we already touched on, limited cabin space is a big one for Lotus owner - and can actually ruin the ownership experience for taller drivers.Installing a Tillett seat can immediately address this issue as the seats lower the driver significantly, whilst also going all the way back to the bulk head. This gives taller, longer bodied or longer legged drivers the room to adjust and dial in their perfect driving position. As well as giving that much needed extra leg room, you also get much more head clearance when wearing a helmet for track days - especially important if you fit a roll cage.WEIGHT SAVINGDepending on your specific Lotus model and specification and the Tillett seat you opt for, you can achieve significant weight-savings.The stock seats in the new Emira, for example weigh in at 52kg a pair and sit very high in the vehicle. Compare that to a Tillett B10 which weighs just 4.5kg - giving a massive weight reduction of over 82% at 43kg saved (for a pair). TRACK READINESSTillett seats are proven in motorsport, having created winning carbon composite components from kart to production car racing through to manufacturers such as Caterham and Aston Martin.With Tillett you are sitting in a seat designed to perform, meaning that you have an anatomically superior body-supporting shape, and uprated ergonomics allowing perfect access to driving controls.HANDLINGAs well as providing a more dynamic seat angle, Tillett seats lock the body in position whilst allowing the driver to control the vehicle unhindered by intrusive shoulder support, or movement in a flexible shell.Additionally, the lowered seating position results in a considerably lower centre of gravity - especially when you consider that in the lightweight Lotus, the weight of driver and passenger is a major part of the overall rolling weight. This directly contributes to improved handling, enhancing stability, traction, reducing body roll, and boosting braking performance.SAFETYBecause Tillett’s competition programme requires its race seats to be designed to meet very stringent safety standards, they are able to apply the same approach and processes in developing its road-going range. Safety is meticulously integrated into every facet of a Tillett seat, encompassing design, construction, materials, and restraint systems, including features like six-point race harness compatibility and HANS device integration.EXTRA COMFORTOne of the best improvements, and one which surprises many drivers new to the Tillett brand, is the comfort upgrade they provide. This is mainly down to the accuracy of the profile and shape of the seat, which means that excessive padding (often used to mask a poor structural fit) is simply not required. Most drivers find that a Tillett seat is not only incredibly comfortable, but it is much more comfortable than the stock seats- even over long distance journeys.THE INSTANT WOW FACTORA Tillett seat adds style and drama to any cabin space. In alignment with Lotus' commitment to purposefulness and functionality, a Tillett seat becomes the perfect complement, enhancing the overall aesthetic and functionality of the interior.Scope of delivery:2x Carbon seats Tillett B102x seat rails2x Emira-trimsAttention: Motorsport part without road approval!

Suspension kit Nitron Cupsport NTR40 for Emira V6 Range The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control. 3-Way independent damping adjustment. By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment for road and/or track use. Piggyback mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car. The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas. The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters. All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 3-4 weeks, but at certain times may be slightly longer. We deliver a full set for a car (4 Dampers and Springs). If not noticed we deliver parts for a LHD car. Note: Image(s) used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

Lotus GT4-Motorsport Spoiler for Emira Attention: This kit is not yet available and is only intended to give you an insight into our plannings! We will communicate the exact specifications, pricing and availability as soon as it is finally available. Thank you for your understanding. No street use availability yet. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Official Lotus Merchandise: The new Lotus Evija This is a must have for every true Lotus-Enthusiast! Model Scale 1:43 in silver. Material: Resin Country of Origin: China Weight = Volume Weight