The AIM MX2E Plug'n'Play Display Kit for your Lotus! Replace your original Lotus display with a much more functional and modern instrument with lots of additional information for you as the driver. The display already comes from AIM with an adapted speedometer cover with four selection buttons and the GPS module integrated. The connection is made directly via the OBD interface. Thanks to the integrated GPS module, exact lap times can be taken and saved (4GB). The data currently available comprises around 4,000 race tracks worldwide and is continuously being expanded by AIM. The "experienced" data sets can be read as a summary directly on the display or evaluated in full and for professional analysis via WiFi on a PC. In addition to the elementary things that the original part offers (e.g. total kilometers, daily kilometers, water temperature, speed, rev counter, etc.), the MX2E has LED shifting (10) and alarm (6) lamps. The display comes with the necessary icons for classic road use (turn signals, tank, low / high beam, engine control lamp) and also has a wifi connection. In difference to the other available AIM displays, this variant is limited to a 4-channel-upgrade and route-specific lap times are recorded, but no engine data! It can be used for all Elise and Exige MY2011-2019 (1/2ZR & 2GR)! Technical specifications: 6 "TFT display (800x480) 18 integrated LEDs (10x switching LED, 6x status information, 2x blinker) 14 digital informations (tank display, water temperature, km/h, speed, etc.) 4 buttons integrated in the housing WiFi connectivity 4GB Memory The display also offers you the choice between: 4x color schemes (blue, purple, white or yellow), 2x info themes (road or track), 2x display styles (analog or digital) = 16 different setting options! Optionally available (on request and at an additional cost): a) AIM-SmartyCam HD incl. fitting kit! This camera does recordings in H.264 quality (1280x720 pixels @ 30 fps) and can be equipped with SD memory cards of up to 128GB (not included). 1 hour recording requires approx. 4 GB storage space with the highest quality setting. The film material can show the determined parameters with activated "Data Overlay". b) 4-channel expansion enables the addition of 4 additional 0-5 volt analog connections for e.g. Pressure and temperature sensors. c) Lambda controller d) Reverse Camera  (Bilder © 2019 AiM Tech Srl)   Motorsportpart - Track use only - NO street use StVO/StVZO!

Plug&Play Display System for Elise/Exige/211/Speedster from 1996 Discover our newly developed Plug&Play Display System, specifically designed for owners of older Elise and Exige models. This cost-effective solution utilizes the high-quality Ecumaster ADU5 display (5 inches) and allows for easy installation with our mounting kit. Simply replace the original display using the appropriate adapter plugs for a seamless transition. The ADU5 display impresses with its brilliant resolution, excellent readability, and extensive configuration options. It features multiple display pages that can be fully customized to meet your needs. A base configuration for Elise and Exige is pre-installed upon delivery. In its base version, the display shows all essential data transmitted via the standard Lotus CAN Bus, including: - RPM - Coolant temperature - Speed - All warning lights - Fuel gauge - Boost pressure   Additionally, the system includes the following features without any upgrades: - Programmable shift lights - Data logging via USB stick   For expanded functionality, additional sensors such as oil pressure and oil temperature can be integrated, which must be installed separately. Furthermore, to display and analyze lap times, the "GPS to CAN Module V2" is required (link). For custom programming tasks, we recommend also purchasing the "USB to CAN" adapter. Experience the perfect blend of technology and user-friendliness with our Plug&Play Display System!

Fits any car with Control Area Network (CAN) bus.

Plug&Play Display System for Lotus Elise and Exige from 2011 Introducing our advanced Plug&Play Display System, meticulously designed for owners of Lotus Elise and Exige models from 2011 onward. This cost-effective solution features the state-of-the-art Ecumaster ADU7 display (7 inches) and allows for effortless installation with our comprehensive mounting kit. Simply replace the original display using the appropriate adapter plugs for a seamless upgrade. Please note that the display binnacle cover is available only as an exchange. The ADU7 display impresses with its stunning resolution, exceptional readability, and extensive customization options. It offers multiple display pages that can be tailored precisely to your preferences. A base configuration for Elise and Exige is pre-installed upon delivery. In its base version, the display showcases all vital data transmitted through the standard Lotus CAN Bus, including: - RPM - Coolant temperature - Speed - All warning lights - Fuel gauge - Boost pressureAdditionally, the system includes the following features without any upgrades: - Programmable shift lights - Data logging via USB stickFor enhanced functionality, you can integrate additional sensors such as oil pressure and oil temperature, which must be installed separately. To display and analyze lap times, the "GPS to CAN V2" module is required (link). For those interested in custom programming, we recommend purchasing the "USB to CAN" module as well. Elevate your driving experience with our Plug&Play Display System, where cutting-edge technology meets user-friendly design, specifically tailored for your Lotus Elise and Exige!

With this lever, you can retrofit the cruise control on your Lotus. Possible for all Elise models from the year 2011 onwards, this can only be done in conjunction with an ECU coding. Therefore, installation is only possible at a Lotus dealer!

The new taillight set from Komo-Tec, featuring high-quality LED components, can be easily installed with our custom-made bracket. It looks modern with its clear glass optics and provides a real alternative to the stock lights. In combination with additional reflectors and the provided E-certification mark, unlike many US and CN products, no registration is even necessary!Suitable variants:a) 4x taillight set for Lotus Elise Mk2 (MY2001-2011) and Mk3 up to MY17.5, as well as Exige S V6 / Sport 350, 2-Elevenb) 2x taillight set for Lotus Elise Mk3 from MY17.5 onwards, as well as Exige Sport 380/410/430, Evora, 3-Eleven

AIM MXP (Strada) Displays for Elise / Exige Note: The respective price information already includes the necessary assembly costs and the sensors required for the basic setup! The AiM MXP 1.3 is a free configurable 6“ TFT-display with integrated data recording. It has 5 configurable RGB alarm-LED’s, 10 configurable RGB shift-lights, WiFi-connection, three CAN connections und two of them to receive data from over 2000 ECUs of the industry-leading ECU manufacturers. In the Strada version, the display comes without a G-meter, without memory and fewer interfaces (see excerpt from the table). All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC.   Version: MXP Race MXP Strada* Display: 6" TFT-Display 6" TFT-Display CAN-Connections: 3 3 Analog-Inputs: 8 8 Digital-Inputs: 4speed 1rpm 1speed 1rpm Internal Memory: 4 GB - G-Mesuarment: triaxial +/-5G - Alarm-LEDs: 5 RGB 5 RGB Shift-LEDs: 10 RGB 10 RGB Weight/Size: 640g 189,6x106,4x24,9mm 590g 189,6x106,4x24,9mm *Necessary for street approval due to existing icons to achieve individual acceptance Optionally available: AIM SmartyCam 3 GP including holding kit! The new SmartyCam 3 GP is the ultimate full HD motorsport camera with finger camera and integrated ECU interface. This version is the new GP version of the SmartyCam 3 range and is designed for all racers who want to get the most out of every performance video on the track.This camera enables recordings in H.264 quality (1920x1080 pixels @60fps) and can be equipped with SD memory cards of up to 2TB (not included). 1 hour recording requires approx. 5 GB of storage space at the highest quality setting. With the “Data Overlay” activated, the film material can display the determined parameters. The camera's diagonal field of view allows shots at 67° or 84° or 120°.   Vehicles before model year 2004 - price on request!

GPS to can Module V2 Ecumaster Emu Black ProThe Ecumaster GPS-CAN module provides highly accurate position tracking with an update rate of 20 Hz.The module can use GPS, Glonass and Galileo satellites with the included external active antenna.Thanks to an integrated 3-axis accelerometer and gyroscope, the device can provide information on speed, position, orientation and altitude.All GPS data is transmitted via the CAN bus.The GPS module is designed to work with the ADU display/logger and enables real-time lap times, predicted lap times as well as offline track maps and data analysis.With this module, you can take your vehicle performance to a new level and get more accurate information for race training and vehicle optimization.

ECU Master USB to CAN The ECUMASTER USBtoCAN is a USB interface that allows the user to connect to the CANbus network. It supports the CAN 2.0A and CAN 2.0B. standards. It is equipped with an LED status diode for quick diagnostics and a 120 ohm terminator that can be switched on or off to relieve the user of the need to use external terminators.This device is used to communicate with the PMU-ADU & PRO-ECU.

52 mm stepper motor gauge, oil pressure 0-7 bar - Microprocessor-controlled stepper motor - 270 ° dial for superior readability - Maintenance-free LED backlight - Includes high-quality sensors.

52 mm stepper motor gauge, oil temperature 40-140 ° C • Microprocessor-controlled stepper motor • 270 ° dial for superior readability • Maintenance-free LED backlight • Includes high-quality sensors.

LITE↯BLOX LB20XX smart lightweight battery (13Ah, 4-8 cylinder engine, 2500-4000ccm) Our versatile high performance starter battery LB20XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany. features saves 15-20kg (33-44lbs) to a standard OEM starter battery with 35-55Ah capacity plug’n’play replacement – fit for almost any production car wireless interface for wireless data monitoring via Smartphone App maintenance-free due to intelligent BMS-System (over-/undervoltage, over-/undertemperatur, overcurrent & short ciruit) innovative & smart electronics for kill-switch via Smartphone App in two different programs:1.) I.K.O.S. – Intelligent Kill-Operation-Switch:effective disconnection of the LITE↯BLOX from the vehicle due to overload or via Smartphone (emergency or extended sitting periods), similar to the common FIA kill-off switch2.) A.V.A.T. – Active Vehicle Anti Theft:while all consumers are still being provided with energy, the LITE↯BLOX will instantly shut down at any theft attempt latest premium cell technology (LithiumWerks ANR26650M1B V3) rapid charging (optimal für Start-Stopp) marginally self-drain when not in use (sitting time >200days) fail safe due to innvative concept and premium materials tested in professional motorsport & FIA approved for Formula3 F3 plus Motorsport-UK registered (11/LI/19) engineered & handcrafted in Germany with a 5 year extended material guarantee application 4-8 cylinder engines (2500-4000ccm***) daily driven car use with restrictions (vehicle parking periods 2-4 weeks*) sportscar / tracktool / motorsport (race track circuit / 24h race / endurance / dragracing / formula F3 / NASCAR) / tuning / Car-Hifi / boats for the use in applications with intelligent battery management (IBS / IAC) –> battery programming mandatory! for all vehicles from 2019 where the car battery can not be programmend to the ECU our special IBS-adapter is mandatory or the use in applications with regenerative brake system use our model LB28XX only for vehicles of the BMW F-series (type M3 / M4), the OEM battery cable of the BMW M2 must be used (IBS 61219117877) technical data weight: 20XXg / 4,4lbs** (24XXg incl. OEM-baseplate) dimensions: 202 x 123 x 100mm (l x b x h) voltage: 13,2V / 15,2V (nom / max) capacity: 13Ah / 35-55Ah (nom / Pb-eq) cranking current: 250A / 750A* (cont / peak @RT) temperature: -20 to +80°C lifespan: lifespan: 3-5x compared to the OEM battery* connection: OEM clamp onto the battery poles (DIN) or via ring terminal (M6) certificates: certificates: product complies with directives 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU delivery scope: LITE↯BLOX + aluminium pole terminals + mounting material For more Information: see downloads section     * depending on usage, setup, peripheral, etc. ** since every LITE↯BLOX is built by hand, there might be marginal deviations in these values

LITE↯BLOX LB0150 charger – LiFePO4 LFP lithium – maintenance Safe, fast and gentle charging with automatic soft start function and 5-stage charging characteristic, specially tailored to our products for "plug'n'play" application. Suitable for commercially available 12V car starter batteries based on lead-acid (wet, AGM, gel), as well as lithium-based batteries (LiFePO4, LFP) with integrated battery management system (BMS).Features 5 years extended manufacturer warranty! Auto-wake up: Automatic waking of deeply discharged batteries with BMS Multi-stage charging phase: pre-charge, soft start and constant current phase Auto-Restart: after voltage drop Safe use: protection against short circuits, reverse polarity and overcharging Integrated live status query via smartphone app Technical Model: LB0150 Operating voltage: 230VAC (50/60Hz) Output current: 10A (± 10 %) Power: 150W (± 10 %) Housing: black plastic housing Operating temperature range: -40°C to +60°C Dimensions: 60 x 105 x 190 mm (lxwxh)Weight: 0.9kg IP protection class: IP65 Efficiency: 94% Scope of delivery: Charger with power plug (1.5m) & charging cable (1.5m) with pole terminals or ring cable lugs, operating instructions

Fitting Plate for Lite-Blox-Battery (1.4 or 2.0)