Timing belt / Cambelt for K-series engine.Please select the correct type of cambelt. We cannot determine which cambelt is on your specific car, so please check before ordering. It is possible to determine the type of cambelt on your car by identifying the engine number. You can find this on the rear left hand side of the engine.Engine Numbers:18K4FJ31 153993
18K4FJ32 147263
18K4KL36 118709
18K4KL37 102149
18K4FL66 148135
18K4FL67 665464
18K4FJ78 151555
18K4FJ79 153785
18K4FJ89 146503
18K4FJ90 141815
Generally, engine numbers higher then the above have automatic cambelt tensioners. Anything lower will have a manual tensioner.
You will have to choose which tensioner is installed on your car. Please have a look at below table to determine what tensioner you’d need: Engine Numbers:18K4FJ31 153993 18K4FJ32 147263 18K4KL36 118709 18K4KL37 102149 18K4FL66 148135 18K4FL67 665464 18K4FJ78 151555 18K4FJ79 153785 18K4FJ89 146503 18K4FJ90 141815 Generally, engine numbers higher then the above have automatic cambelt tensioners. Anything lower will have a manual tensioner.
Rover K series cylinder head stage 1. CNC-ported K series cylinder head, standard valve sizes. Ported inlet and exhaust, modified valve seats, all done by CNC machining, this offers a perfect high quality porting. The development head was machined and tested on flow bench, before we start the production of the heads. We offer 2 different versions, the "standard" cylinder head machining, and the cylinder head machining inkluding new valves. The cylinder head is a replacement part, so we´ll need back your old part. If you not agree with this, we´ll have to rise a charge of 300,- Euro.
The compression ratio is reduced to 8,5:1. The piston bolt is 1mm thicker than standard. The con rod has to be machined. The set of four will be delivered with rings and bolts.
Headgasket Kit for your Lotus with Rover Engine If you have a leaking cylinder head gasket at your Lotus Elise it happens mostly due to the temperature of the engine. This kit should be able to fix it: 6-layer Metal-Headgasket Aluminum Oil Rail Head Bolt Set
Special manufactured con rod bearings in Vandervell lead indium material. For HD use. Available in standard size or 0,25mm oversize. The bearings get shipped per set.
