Schmiedefelgen Evora  sizesfront wheel 19×8 ET55rear wheel 20×9,5 ET69 weightsfront wheel 7,95 kg (17,53 lb)rear wheel 9,50 kg (20.94 lb)(fully coloured, including logo cap, excluding valves) Weight comparison to all Lotus Original forged wheels (set comparison):– 8,1 kg compared to Evora NA/S 18/19″– 9,6 kg compared to Evora NA/S 19/20″– 5,5 kg compared to Evora 400– 4,1 kg compared to Evora 410 Sport, GT 410, GTS430– 10,5 kg compared to Evora GT430, GT410 Option

Harness-Bar for Evora / S 2+2 (not 2+0!) to use 4Pt.-Harnesses (not included). Bar replaces the rear seats! Motorsportpart - Track use only - NO street use StVO/StVZO! [Volumeweight]

Lotus Sale: Carbon door sills for the Evora 400 range We deliver a set as shown (LH + RH) for Evora 400, GT410, etc. Caution: assembly work required! Sale! First in - first serve - principle! Special order = No exchange! When stock is out of stock, no backorders can be made. If you have any questions or want to inquire about the current stock: please send us an email!

Lotus rim set Evora GT410 "Forged" The forged wheels of the Lotus Evora GT410 in 10-spoke design as a limited offer!Available in matt black or diamond cut design. Set contains:2x rim front axle: 8x19" ET55;2x rear axle rim: 10.5x20" ET69. Attention: Sale offer! Only as long as stocks last! Please note that depend on the model, the wheels/tire sizes must be registered.Registration is possible in our company via individual acceptance (german TUV approval §19.2) (charges to buyer). [volume weight information]  

Carbon Door Handels for your EvoraFactory Side Lotus fits Plastic or Leathercovered handels!We offer you a lightweight Carbon-Option! We deliver a car set!

Wheels KT-7Forged for Evora Mk1Our new Forged Wheel for Evora Mk1 is unique and aspecially designed for the Light-Is-Right-Philosophy of Lotus by lowering rotating masses. Set consists of:2x Rims front: 9,0 x 18";2x Rims rear: 10,5 x 18".The wheel is available in black. This is a set aspecially made for customers who use their Evora on Track and would like to use Semis/Slick Tires! Motorsportpart - Track use only - NO street use StVO/StVZO!We recommend to use 235 tires in the front and 285 in the rear!Attention: There are no centre-caps in the delivery included. Please order separately. Also please note that there has to been small reworks at the lower rear wishbone to fit the wheels right. (Weight for shipping calculation = volume weight)

Lotus Sale: Carbon Binnacle Cover for the Evora 400 range We deliver the original Carbon Cover as fitted on GT430 for Evora 400, GT410, etc. Sale! First in - first serve - principle! Special order = No exchange! When stock is out of stock, no backorders can be made. If you have any questions or want to inquire about the current stock: please send us an email!

This high-quality alloy radiator has the same dimensions at a higher capacity than the OEM cooler.The installation can be performed without any adjustments. 

Cupholder for Evora Screwed into the middletunnel! We deliver a Kit contents Cupholder and Screws (see picture 2).

Alloy face level vents Made of aluminum this set looks really amazing in your dashboard. The set consists of four high-quality aluminum nozzles and replaces the standard parts. The nozzles can be moved to guide the air flow and can be closed by turning. Optionally available for Elise / Exige (from MY2008 onwards / Airbag) or Evora 400 models (2015-2020).

sports camshafts Exige/Evora 2GR

For high engine power outputs and/or regular track usage, it is recommended to install robust studs instead of the original cylinder head bolts. These ensure reliable durability even under the highest loads and do not need to be replaced during revisions (unlike OEM bolts). For continuous track or trackday operation with 2GR-FE engines producing over 450 PS, highly durable ARP studs should be installed. Benefits:Reusable indefinitely (unlike the originally installed cylinder head bolts, which must be replaced each time the cylinder head is removed)Reliable even under very high power outputs Product Details:Sturdy replacement for stock cylinder head boltsNo modifications required on the engine blockTested and proven up to 900 PS in the 2GR-FE engine (Twin-Turbo) Compatible withAll Exige S3 models (V6)All Evora models

The original Toyota OEM crankshaft for the 2GR-FE engine guarantees the highest quality and reliability. The use of cheap imitations is strongly discouraged. Used crankshafts often come from engines with previous damage, may be bent or have irregularities. When replacing the crankshaft, we recommend the use of a new part without exception.Benefits and Advantages:Reliable OEM quality productProduct:Brand new Toyota Genuine CrankshaftLotus Part number: A132E6196SSuitable for:All Exige S3 models (V6)All Evora models3-ElevenEmira V6Scope of delivery:1 piece original Toyota crankshaft with OT sensor disc

The premium heat protection insulation provides effective shielding of the components installed in the engine compartment from the radiant heat of the exhaust system, resulting in lower temperatures throughout the engine compartment. This insulation protects surrounding parts and creates thermal reserves, especially in demanding high-performance applications. This type of insulation is standard on many high-quality high-performance cars, factory motorsport teams and professional racing. Our premium insulation is of the highest OEM quality. The insulation of the manifolds greatly improves performance, and optionally the trouser tube and sports catalytic converter can also be equipped with our premium heat protection insulation.Attention: Additional option! Your series parts must be sent in for this! Benefits & Advantages:Protection of the components in the engine compartment by shielding them from unwanted radiant heat from the exhaust systemLower temperatures in the engine compartment create thermal reservesSimplified service access around the manifolds or on the trouser pipe thanks to a cooler environment for mechanics.Ultra-light design. Product:High insulation value despite thin profile (10-15mm diameter).Individually adjustable insulation thickness, especially in narrow spaces.Outer shell made of robust stainless steel, only 0.2mm thick. Suitable for:All Exige S3 models (V6)To the Evora models3-ElevenEmira V6 Scope of delivery:Professional premium insulation of the manifolds.Optional: Additional premium insulation for trouser tube and sports catalytic converter.

Carbon Airbox System for Lotus Evora S/ 400+ and Exige S V6. Specifically designed for our performance stages EV/EX410, 430, and 460, we have developed this airbox system. However, it can also be used on stock vehicles.With a significantly larger filter surface area and improved air intake, this airbox system can achieve noticeable improvements in power and torque. Even on stock vehicles, additional horsepower gains of approximately 20 hp are possible.We always recommend using the system in conjunction with a software tune, as the significantly improved efficiency may require adjustments to the fuel injection map. Running too lean can lead to engine damage.The Airbox system includes:KT Aluminum Mass Air Flow Sensor HousingKT Carbon AirboxAir Filter InsertAluminum Mounting Bracket for AirboxAluminum Intake Funnel (Exige only)Vacuum Reservoir (to maintain the function of the exhaust flap control)

Wheel bearing 5 hole for Exige V6, 3-Eleven & Evora Fits following models:Exige V6, Exige 400+ und 3-Eleven only rearEvora Mk1 front and backEvora 400 front and backPrice per piece.

Stock brake pads for:Exige Mk3 V6Exige Mk3 400+Evora Mk1 naEvora Mk1 S3-Eleven

Fits any car with Control Area Network (CAN) bus.

Original Lotus Shower Cover "Evora" The shower outdoor cover is lined and suitable as a rain cover for outdoor use. The material adapts to the shape of the vehicle. Unique design and lotus branding Packed in bags with Lotus branding Tailor-made for the current models in the Evora 400 range, but these also fit the earlier Evora Mk1 (n / a and S).

Lotus DustcoverThe original Lotus-Dustcover fits perfectly to your Lotus. It protects your car at the inside.The Cover is black with silver Lotus-Letters printed on it and will be delivered with a bag.To protect your paint it is very soft flocked on the internal side, and protects your vehicle against dust and dirt.

Original Lotus Dust Cover "Evora" The Dust Indoor Cover is made of a hard-wearing black fleece-lined fabric with the Lotus logo in white, attached to the front in a striking manner. In addition, the brand logos of the respective models are attached to the sides and “For the drivers” in the rear. Breathable, fleece-lined stretch material The material adapts to the shape of the vehicle Unique design and lotus branding Packed in bags with Lotus branding Lotus branding on the front to identify it as a genuine product Tailor-made for the current models in the Evora 400 range, but these also fit the earlier Evora Mk1 (n / a and S).

Lotus DustcoverThe original Lotus-Dustcover fits perfectly to your Lotus. It protects your car at the inside.The Cover is black with silver Lotus-Letters printed on it and will be delivered with a bag.To protect your paint it is very soft flocked on the internal side, and protects your vehicle against dust and dirt.

KT-7 Speed Sequential Manual Transmission (7-speed) Lotus uses either a manual 6-speed manual transmission, or a torque converter automation in the IPS-Spec of the Lotus Exige. In the case of ambitious driving, a major disadvantage of a classic gearbox is the shifting process per se, the needed shift-time, including missing torque and in addition, the resulting possibility of faulty operation. The torque converter has the disadvantage of less efficiency and thus friction losses, slow shifting times and it is very heavy-weight. The Komo-Tec 7-speed sequential gearbox is what will separate your Lotus from the rest of the pack! The gearbox was developed following a strong demand from Lotus-drivers needing to gain the additional performance that factory part cannot deliver. The non-synchronized, straight gearing is for a gearbox of this design surprisingly low noise while normal driving. The main advantages are obvious: faster acceleration,higher strength (rated up to 900 Nm)lightweight (only 58.5 kg)quicker shifts (flatshifting of gears as little as 40 milliseconds)a range of optional ratios (5 different options are available for Max-Speed: 274, 212, 252, 231, 297 km/h)Another advantage is: The transmission is specially designed for the Lotus Exige V6 and Evora and therefore has the advantage that the original driveshafts, couplings and brackets can be adopted without any modifications (on the engine side). The installation is therefore faster and cheaper than with other sequential gearboxes that has been developed as universal transmissions. Universal oil coolers and / or an oil temperature sensor can also be added as an option (surcharge). Unique to this type of transmission is an externally adjustable differential nut. The maximum adjustment is 13kg and it is possible to customize the ramp angle of the differential lock to customer requirements. The standard ramp angles are 53/0 and 40/0. Depending on customer requirements, we can provide a very short close ratio gearbox for you or you are chasing the 300 km/h. So there is an option for everyone that is right. Kit includes: Sequential gearbox 7 speed with dog engagementLimited slip differential (externally adjustable)Gears 1st-7th and final driveInput and Ouput shaftsSelection of 5 different gear ratiosDigital gear display and sensorGear shift levers and cableselectronic control unit for switching interruptionadjustable shifting optionRevisioninterval when using racetrack: ca 5000 km. It is very helpful to use the sequential Gearbox in conjunction with our Alloy Flywheel and Sinter-Metall Clutch: http://komo-tec.com/Shop/en/Exige/MK3-Toyota-V6/Gearbox/Super-lightweight-aluminum-flywheel-with-sports-clutch-Exige-S-V6-Evora-S.html Motorsportpart - Track use only - NO street use StVO/StVZO!

Now our Ko-Bra 4-4 braking system is available for the Lotus Evora, too. We use a 362mm (350mm Series) Brake disc on the front and a 343mm (Series 330mm) brake disc on the rear axle of the quality manufacturer PFC (Performance Friction Brakes) with a screwed alloy-pod. The pods are manufactured out of F52 aluminum. By using the two-part brake disc, and a larger rotor diameter, thus lower fading tendency. This all is figured without increasing the brake disc weight. The weight of the front disc is 8.3kg. (Series 9.4) at the rear discs are there 8.1kg (series). The original caliper is still used and distances with an adapter. The delivery incl. PFC brake pads front and rear. Assembly requires technical knowledge!