Komo-Tec KoBra-4-4-Sportbrakesystem Emira  (Front and rear axles, 378/356 mm) Now our Ko-Bra 4-4 braking system is available for the Lotus Emira, too. We use a 378mm (370mm Standard) Brake disc on the front and a 356mm (350mm Standard) brake disc on the rear axle of the manufacturer PFC (Performance Friction Brakes) with a screwed alloy-pod. The pods are manufactured out of F52 alloy. By using the two-part brake disc, and a larger rotor diameter, thus lower fading tendency. This all is figured without increasing the brake disc weight. The weight of the front disc is 9.0kg. (9.1 Standard) at the rear discs are there ___kg (10,3kg Standard). The original caliper is still used and distances with an adapter. The delivery incl. PFC brake pads front and rear. To keep it a plug'n'play-kit we decided to increase size on the rear belt just slightly because of the new handbrake-caliper. The brakeforce is great by still bigger diameter and better by using high-quality components. Additional advantages of the “floating discs” on the front axle: The new friction rings have a smaller friction surface, so that in combination with optimized brake pads we generate a higher braking capacity and at the same time better heat dissipation. Due to the lower disc temperature, the expansion and thus the unbalance are lower. This (unbalance and temperature) minimizes the transmission of the loads to the brake pot, ensures less tension in the overall system and thus also protects the wheel bearings from increased wear. The grooves serve for better cooling, the removal of the brake dust and at the same time as a wear level indicator. In contrast to the floating discs installed by Lotus in the early Cup models, PFC works with a patented fastening system in order to keep the otherwise clattering discs almost noise-free thanks to spring preload. When replacing the friction disc later, the alloy pot can be reused and only the friction ring itself has to be replaced (much cheaper than the factory discs)! Weight comparison:front:KoBra disc (FLOATED) - 9.0kgStandard disc (2-pcs) Emira - 9.1kgrear:KoBra disc - ___kgStandard disc (2-pcs) Emira - 10.3kg Sizing:front:KoBra discs: 378x32 mmStandard disc: 370x32 mmrear:KoBra discs: 356x32 mmStandard disc: 350x26 mm The KoBra 4-4 braking system consists of:2x grooved brake discs 378x32 mm FLOATED2x grooved brake discs 356x32 mmfloating alloy pots at the front, screwed aluminum pots at the backPFC sports brake pads front and rearFixing and adapter kit Assembly requires technical knowledge! TUV §19.2 approval possible inhouse.

Emira seat badges "Lotus" and "Emira" to selectWe deliver a pair (2 pcs.)

Larini Systems is one of the world’s finest resource for high performance, classic and sports car stainless steel exhaust systems.Every Larini System is a combination of precision engineering, aircraft-grade stainless steel and elegant design. A Larini System is the natural choice for anyone looking to improve on the aesthetics, acoustics, or longevity of their current exhaust system.This system is designed for the Lotus Emira V6. It’ll bring the car alive producing more a nice and burbly noise. The system comes with an adapter which allows you to re-use the original valve. This prevents you from having any issues with check lights etc. Motorsportpart - Track use only - NO street use StVO/StVZO![Weight specification: volumetric weight for shipping cost calculation]

Emira Wiperblade1 Set will be delivered (2 pcs.)RHD on request.

Only for Emira GT4 with Alcon braking system, not street-legal!

Original Lotus hub caps for the EmiraAvailable in black/silver or yellow/green.Price per Set (4 Pcs.)

Original Lotus 20” Gloss Black Alloy Wheels with Michelin Pilot Alpin PA4 TiresOnly for Emira V6!Front tires size: 235/35R20 92WEfficiency: D, Wet Grip: C, Noise: 70 dB (two bars)Rear tires size: 285/30R20 99WEfficiency: D, Wet Grip: C, Noise: 75 dB (two bars)Please observe the speed rating. Max. 270 km/h!Photos are for illustrative purposes only. The actual product may differ from the image shown.WARNING: Clearance must be individually checked on each vehicle!

Original Lotus 20” Gloss Black Alloy Wheels with Michelin Sport Cup 2 Semi-Slick TiresOnly for Emira V6! Michelin Sport Cup 2 Semi-Slick Tires Front tires size: 245/35R20 95YEfficiency: D, Wet Grip: C, Noise: 70 dB (two bars)Rear tires size: 295/30R20 101YEfficiency: D, Wet Grip: C, Noise: 74 dB (two bars)Goodyear Eagle F1 Supersport Front tires size: 245/35R20 95Y Efficiency: D, Wet Grip: A, Noise: 71 dB (two bars) Rear tires size: 295/30R20 101Y Efficiency: C, Wet Grip: A, Noise: 73 dB (two bars) Photos are for illustrative purposes only. The actual product may differ from the image shown.WARNING: Clearance must be individually checked on each vehicle!

Delivery box for the Lotus Emira in body color, featuring a key compartment in the base for the spare key. A delivery box in the selected body color will be provided; the boxes shown in the title image are for illustrative purposes only! Dimensions of the model: 17x7.5x3.5 cm

New Emira V6 Forged Wheels (4) in Silver Front 20 x 8.5 ET 57 889054842003S Rear 20 x 10.5 ET 54 889054842403S The rear wheels DO NOT fit 4 cylinder cars, due to a different offset!

KT sport air filter for Emira V6, easy replacement of the stock filter. This sport air filter has been specially manufactured for us KT and is therefore a custom-made product, which only we can offer.stands out with the latest filter technology, optimal filtering efficiency (up to 80 microns) with maximum airflow.The filter no longer needs to be replaced; with proper maintenance, it has an unlimited lifespan. An important aspect of the new filter material is that unlike other filters, it does not need to be oiled during cleaning, reducing the risk of errors in the mass airflow sensor, which unfortunately occurs repeatedly in the Lotus V6 models.

Long-distance pad with a medium coefficient of friction.Excellent cold braking performance, relatively low noise for a sport brake pad, and very temperature-stable.The 08 pad features a slightly increasing coefficient of friction with increasing temperature, while also offering excellent recovery and control properties. The optimal temperature range is 100°C to 700°C. Only suitable for vehicles with standard brake discs. Motorsport part - Not road-legal! Not permitted under German road traffic regulations (StVO/StVZO)!

Leather Care Kit Scope of Delivery: Leather Cleaner 200ml Water-based, highly effective cleaner designed for cleaning genuine leather interiors. Should be used before applying the leather protector. Leather Protector 200ml Advanced product that helps remove oily, alcoholic, and water-based stains from leather. It can soften the leather and give it a polished effect. Cloth Sponge Instructions

Carbon Fiber Frame & Enginebay Cover – Lotus Emira V6 For true carbon fiber enthusiasts – upgrade your Lotus Emira V6 with our high-quality carbon fiber frame and matching enginebay cover. Crafted from lightweight, high-quality carbon fiber, these components combine a racing-inspired look with a sophisticated finish. Made from genuine carbon fiber with an elegant surface, this set gives the engine bay a subtle yet striking look—without any glare. Highlights: • Genuine carbon fiber with a high-quality finish and visible weave • Lightweight, heat-resistant, and extremely durable • Perfect fit and OEM-quality craftsmanship • Enhances the engine bay’s appearance with a sporty, aggressive design If you love the look of carbon fiber and want your Emira V6 to reflect that, this set is the ultimate upgrade for a sophisticated and understated look in the engine bay. We deliver in gloss finish, matt finish on request!

EMIRA Key Bag It is precisely molded to match the original car key at a 1:1 ratio, ensuring a perfect fit. The fully wrapped design offers all-around protection for the car key, shielding it from scratches and impacts. The embossed buttons are clearly defined and easy to operate. Made from selected top-grade NAPPA leather, it provides a soft and refined touch. The premium dark grey color, paired with a hollow center design, highlights the brand logo. The inner layer is crafted from Alcantara, gently and delicately enveloping the key. It offers cushioning to protect the key from scratches and collisions, both inside and out. The matte-finished zinc alloy ring is dirt-resistant and hard to scratch. Lightweight and minimalistic, it offers a comfortable grip. The snap button design makes installation and removal quick and easy. Product Details: Material: NAPPA leather + Alcantara + Zinc alloy Color: Dark grey Size: 14.5 × 5.5 × 2 cm

The Aero front splitter for the Lotus Emira is made of carbon fiber, laid in a V-shape, making it particularly lightweight, robust, and visually sporty! Especially at high speeds, the optimized aerodynamics ensure significantly better roadholding and a safer driving experience! Utilize the car's full potential on the road or racetrack. The overhang to the front clam is approximately 4 cm at the front sides and approximately 7 cm at the front center. This means the Emira’s breakover angle is affected. The side fins are approximately 7 cm high. The entire component(~shipping) measures approximately 190 x 65 x 10 cm and can therefore only be shipped as bulky goods within the EU!Shipping is calculated based on volumetric weight (21kg). The component itself weighs approximately only 1,4 kg. The carbon fiber front splitter is designed as a plug-and-play solution and features OEM screws for the easiest possible installation. Please note: All carbon fiber parts are available with a matte or glossy clear coat finish. Unless otherwise stated, we ship parts with a glossy clear coat finish. Our carbon parts are produced in small batches! Minor adjustments may be necessary in individual cases. Motorsport part - Not road legal! Not permitted under German road traffic regulations (StVO/StVZO)!We can do a single approval for german road use inhouse (costs to pay by the buyer).

LOTUS CHAPMAN BESPOKE PartsSpecial use for special vehicles, made of flexible resin and 3k woven carbon fiber, high-strength, lightweight material with good shock absorption performance.Clear and beautiful texture, smooth surface, delicate touch, wear-resistant and corrosion-resistant, waterproof and moisture-proof.Environmentally friendly material, antibacterial and odorless, easy to clean with just a wipe. Product details:Material: Flexible carbon fibre +PET claw clothColor: blackLHD Size:Main driver 1 piece: 565*525mmCo-pilot 1 piece: 480*525mm Notes:When installing the foot pad, first use a one-word tool, such as a game coin, to rotate and unscrew the basic velvet foot pad buckle nut; then place the new foot pad in place, align the round hole with the chassis nut; finally, align the product's matching buckle nut with the chassis nut, press it, and rotate and tighten it.

Introducing the new carbon fiber side skirts, specially designed for the Lotus Emira!Our side skirts are manufactured with the utmost precision to enhance the look and performance of your Lotus while preserving the brand's heritage and design. Unlike other aftermarket options with single-sided constructions designed to save costs, our splitter is made from double-sided, ultra-lightweight, autoclaved prepreg carbon fiber. The result is a lightweight and extremely robust construction. The design of our side skirts not only accentuates the elegant appearance of your Lotus Emira but also optimizes its aerodynamics. The wider track created by the side skirts complements the vehicle's shape, giving it a more aggressive and dynamic look while simultaneously optimizing airflow for improved performance.The side skirts are easy to install using the OEM bolts – simply plug and play.Motorsport part - Not road legal! Not permitted under German road traffic regulations (StVO/StVZO)! We can do a single approval for german road use inhouse (costs to pay by the buyer).

KT-Sports Rear Silencer for Emira V6 Stainless steel sports rear silencer for your Lotus Emira 3,5l-V6. Top quality and perfect fit. Deep, sporty sound. Includes valve control (converted from the OEM part), flex section, and heat shielding for the rear silencer. Motorsport part – Not approved for road use! Not permitted for use on public roads (StVO/StVZO)!

Carbon Spoiler KT-Track for Emira The new lotus Emira is an impressive car with many improvements, that's not to say it can't be made a little bit better...Our first test drives with this car on road and track showed that a propper rear wing would suit the Emira not only visually but also technically. We have therefore started to determine a suitable wing profile after extensive development with CAD/CFD and have also completed the driving tests successfully. The Angel of the Wingblade is adjustable. Sizes: Wingblade approx. 125x29cm, hights from rear-clam approx. 19cm. More technical informations to follow.....The wing is TÜV compliant and can be registered. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Phase EM475 Streetfits to Lotus Emira V6. Attention: Due to high demand, please reserve an appointment early! Performance Data EM475: approx. 475 hp / 500 Nm  Technical Data (Emira V6): approx. 400 hp / 420 Nm (Factory Spec) Phase EM475 consisting of: KT-Stainless steel manifold with optimized pipe lengths for TÜV-approval Y-Pipe with special made Catalyst for TÜV-approval KT-sportsfilter Oxygen sensor extension-cable Optimization ECU-Software EM475 (ignition, injection characteristics and camshaft phase adjustment) Dyno run with performance record     CAUTION: Kit requires the use of at least (or higher quality) fuel Super Plus (ROZ98). Kit expires factory warranty to powertrain! German street use by TUV-approval is possible. The costs are to be borne by the buyer. 

Öhlins TTX Sports-Suspension for Emira V6 Öhlins top technology, which has been tested and successed for many years, is now also available for your Emira. The original suspension of the Emira certainly offers extremely attractive driving values ​​from factory side, but there is still significant potential in comfort, responsiveness and useability for the racetrack.   The TTX-Suspension-Set (twin-tube technology) ensures maximum performance, reliability and durability. Due to the high usage of aluminum components and the integration of all functions in one damper unit, the weight of the overall chassis was also kept very low, like the philosophy of Lotus.This stronger setup prevents the well-known indifferent behavior at high speeds and the tendency to roll of and ensures the necessary agility of your Lotus Emira.   The rebound and compression damping, the chassis height and the spring preload can be adjusted separately. The TTX chassis offers you a great wide of options to adjust the Emira according to your individual needs. This provides the driver an optimal balance of comfort, use on roads and the race track. Visually, it is about 15-20mm lower. The suspension kit consists of 2x front and 2x rear damper-/spring units and is supplied with all necessary installation parts. German TUV approval can be done, costs covered by buyer. Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Wheels KT-7Forged for Emira Our new Forged Wheel for Emira is unique and aspecially designed for the Light-Is-Right-Philosophy of Lotus by lowering rotating masses. Set consists of:2x Rims front: 8,5 x 20"; weight: 10,5 kg/wheel (Forged Factory-Spec: 11,5 kg/wheel)2x Rims rear: 10,0 x 20"; weight: 11,3 kg/wheel (Forged Factory-Spec: 13,2 kg/wheel)So this is a total of 5.8 kgs savings! The wheel is available in silver. Motorsportpart - Track use only - NO street use StVO/StVZO! Warranty notice: Please note that all parts that are exchanged on the vehicle for components that are not standard Lotus spare parts can result in expired factory guarantee on this assembly and the assemblies affected becoming null and void. This includes all technical matters. Komo-Tec grants the parts warranty on its delivered components.

Original Lotus Shower Cover "Emira" The shower outdoor cover is lined and suitable as a rain cover for outdoor use. The material adapts to the shape of the vehicle. Unique design and lotus branding Packed in bags with Lotus branding Tailor-made for the models in the Emira range. Note: Previously Lotus will offer 2 Versions (black or grey). Feel free to let us know your preference if you want to.