Carbon A post trim panel for Elise/Exige Modelyear 2001-2008 (without Airbag).We deliver one car set (1x LH- and 1x RH-Part).Please choose for Lefthand- or Righhanddrive.
Carbon door sill cover
for the Elise/Exige MK2, carbon fiber, glossy. Note Modellyear 2008 onwards!
Price per pair.
weight: Standard: 1060g, Carbon: 680g
Note: Our carbon parts are parts from small series production! In individual cases, minor adjustments may be necessary. All carbon parts are available with a clear lacquer finish in matt or glossy. Depending on the batch, there may be different clearcoat colors. Parts with a glossy finish are usually in stock, parts with a matt finish are only manufactured at the explicit request of the customer and vary accordingly in the delivery time. If you have any questions, our team will be happy to assist.
[Volumeweight for Shipping costs]
Cover for the existing binnacle. easy fitmentcheck car production year. Not to use with AiM-Display / Final Edition.
It is a "Lea component" quality product.
Attention: All carbon parts are available with a clear lacquer finish in matt or glossy.Unless otherwise stated, we supply parts with a glossy clear coat finish.
Carbon door sills for vehicles without airbags. (Elise MK2 Rover & early Toyota until 07)Please note the year of manufacture!Price per pair.Note: Our carbon parts are parts from small series production! In individual cases, minor adjustments may be necessary. All carbon parts are available with a clear lacquer finish in matt or glossy. Depending on the batch, there may be different clearcoat colors. Parts with a glossy finish are usually in stock, parts with a matt finish are only manufactured at the explicit request of the customer and vary accordingly in the delivery time. If you have any questions, our team will be happy to assist.
Quite often the Cobra keyfob housing itself cracks or the rubber fob breaks.It’s quite annoying if you have to buy a complete new keyfob (including all electronics) while it’s only a bit of plastic being broken.This is the better solution.. just the Cobra Keyfob housing including the rubber fob. Electronics are not included.Price per piece.
Clearance Sale:AP 308mm Replacement Friction Rings for Lotus BigBrake Kit with 2-Piece Brake Discs
If the rotors are worn (no slots left or cracks through the outer diameter) you have to replace it.Here in the article you can get all the available options of replacement rotors. We deliver a set for one axle (1x LH and 1x RH rotor incl. the fitting kit / bobbins. Normally you can continue with the alloy-pot that exists.
Hints:Please take car of the driving in periode to be sure that everything is running well and to avoid faiding!
Assembly requires technical knowledge!
Timing belt / Cambelt for K-series engine.Please select the correct type of cambelt. We cannot determine which cambelt is on your specific car, so please check before ordering. It is possible to determine the type of cambelt on your car by identifying the engine number. You can find this on the rear left hand side of the engine.Engine Numbers:18K4FJ31 153993
18K4FJ32 147263
18K4KL36 118709
18K4KL37 102149
18K4FL66 148135
18K4FL67 665464
18K4FJ78 151555
18K4FJ79 153785
18K4FJ89 146503
18K4FJ90 141815
Generally, engine numbers higher then the above have automatic cambelt tensioners. Anything lower will have a manual tensioner.
You will have to choose which tensioner is installed on your car. Please have a look at below table to determine what tensioner you’d need: Engine Numbers:18K4FJ31 153993 18K4FJ32 147263 18K4KL36 118709 18K4KL37 102149 18K4FL66 148135 18K4FL67 665464 18K4FJ78 151555 18K4FJ79 153785 18K4FJ89 146503 18K4FJ90 141815 Generally, engine numbers higher then the above have automatic cambelt tensioners. Anything lower will have a manual tensioner.
This fuel pump is a direct replacement for the original part. Although the performance is improved compared to the OE part, we would recommend not to use these units for engine which deliver more then 260bhp.Although the unit looks similar, it is a modern unit and is far superior in design, the unit utilises a educter pump to transfer fuel from the tank to the reservoir can, unlike the old unit that used one section of the pump itself for this task. The pump itself is the latest version turbine type which is more efficient than the original centrifugal pump.
A big advantage of this design is the time needed to refill the canister, this is approx. 5 seconds, which is much faster than the old eductor designs.
The unit is plug and play and comes including a new fuel pump seal.The filter has now been integrated inside the pump housing, this makes it easier to install the unit and it prevents any mishaps to happen. (the filter will not pop off while installing the unit) The sensor used to measure the fuel level in the tank is a new type substrate type sensor rather than the old style wound wire sensor. Big advantage of this type of sensor is.. it doesn’t wear. The original wirewound type sensor can wear out over a longer stretch of time where this new type can’t.
The float arm is designed in such a way that it will fit OE, but also Pro Alloy Fuel tanks. The pump draws less current than the original design and ..it’s quiet! This is not an ill fitting cartridge pump replacement but a complete new unit including a base filter, level sensor, seal etc.
In other words… this is a real plug and play replacement!
Plug&Play Display System for all Elise/Exige/211/Speedster models from 1996 onwards
To offer a cost-effective solution for owners of older Elise and Exige models, we have developed our new display system, which utilizes an Ecumaster ADU5 Display (5"). With our mounting kit, it provides a simple plug-and-play solution. Only the original display needs to be removed and replaced with the new ADU5 using suitable adapter plugs and installation kit. The display boasts brilliant resolution, good readability, and complete configurability with multiple display pages that can be freely customized. Upon delivery, a basic configuration for Elise and Exige is preloaded. In its basic version, the display can show everything sent over the factory Lotus Can Bus data:including RPMwater temperaturespeedall warning lightsfuel gaugeboost pressureAdditional features without expansion include:programmable shift lights data recording via USB stickAdditional sensors such as oil pressure and oil temperature can be integrated by installing the corresponding sensor. For lap timing display and analysis, the "GPS module" must be installed. To undertake custom programming, the "USB to Can" adapter must be ordered separately.
Carbon Fibre Side Intake Scoops in glossy finishScope of delivery Pair (2 pcs.)Note: Our carbon parts are produced in small series! In individual cases, adjustment work may be necessary. All carbon parts come with a glossy finish. Depending on the batch, there may be different "clear coat color tones."
Sports steering wheel for Lotus Elise / Exige Mk1 / 2
Suitable for all Elise and Exige models without airbag (i.e. MY1995-2007), as well as 340R and 2-Eleven.
We deliver a complete set consisting of an OMP sports steering wheel, a matching steering wheel hub and a lotus sticker for the horn button.
We can optionally deliver the kit with or without a snap-off adapter.
We offer the suede sports steering wheel in 2 versions (see pictures):
a) Kubic 310x265mm
b) Targa 330mm
An approval for road-use by German TÜV can be made at our workshop (costs are to be paid by the buyer).