KT-Revmatch for Exige And Evora V6

KT-Revmatch Device For Exige V6 And Evora

Calibrated rev match device for the Lotus Exige V6 and Evora.
A dedicated device for the Lotus V6 Exige and Evora platform, featuring a built-in lookup table that compares engine speed and vehicle speed to calculate the current gear position. When a predetermined brake activation and clutch position are detected, the device sends the correct engine speed request to the ECU, raising the engine speed to match the next lower gear. Includes an OBD port cover stating "DO NOT FLASH".

Connecting the Device

To turn the device on or off, simply plug it into the OBD connector to activate it and remove it to deactivate it.

LED Indicators Inside the Device

• When the device is plugged into the OBD connector with the ignition off, the LED inside will turn blue. If the ignition is not turned on, the LED will turn off after about one minute (sleep mode).
• When the ignition is turned on and the device communicates with the ECU, the LED will turn green.
• When the ignition is turned off while the device is still connected to the ECU, the connection is lost, and the LED will turn red (lost communication). After one minute of the engine being turned off, the device enters sleep mode.

We advise removing the device when not in use.

Fitment Requirements

To enable functionality, we must apply an update to the engine ECU via the OBD connector. This does not affect the engine calibration files.
The device will only work on Lotus T6e ECUs installed in V6-engined cars that have received the necessary update (it will NOT work on other cars unless this update has been installed).

IMPORTANT: Do not allow any further updates to the engine ECU without contacting us first, as this may remove our update. The device will be supplied with a new red OBD port cover embossed with "DO NOT FLASH".

How It Works

• When the brake and clutch are engaged in any gear from 6 down to 2, the device will execute a rev match for the next lower gear.
• This is not a simple throttle blip—it is a precise rev match.
• The device will only rev match a single gear at a time. A clear "clutch pedal released" signal is required before the process can start again for the next gear down.
• If the clutch and brake are pressed while shifting up a gear, the device will still attempt a rev match. Avoid doing this to minimize drivetrain wear.

Please contact us if your vehicle has non-standard gearbox or final drive ratios.

Terms and Conditions

By purchasing this rev match device, you explicitly agree that it will be used solely as an aid for track day driving and NOT on public roads.