Öhlins Advanced Track 4-Way Coilover Suspension with KOMO-TEC Tuning for Lotus Exige V6
The Öhlins Advanced Track coilover suspension was developed for drivers who want to combine maximum performance on the racetrack with good everyday usability. The special KOMO-TEC spring identification ensures a firm and precise setup, while still providing surprisingly good ride comfort on the road despite the high driving dynamics.
With the four-way adjustable damping, the suspension can be precisely adapted to vehicle setup, tires, track, and personal preferences. Rebound and compression can each be adjusted separately in the high and low-speed ranges. Here, high and low-speed refer to the movement speed of the damper, not the driving speed.
Advantages
Special KOMO-TEC spring and suspension tuning
Ideal combination of street use and track day
High driving precision and controlled body movements
Good ride comfort despite firm tuning
Four-way adjustable damping
High and low-speed rebound adjustment separately adjustable
High and low-speed compression adjustment separately adjustable
Height adjustable
Adjustable spring preload
Öhlins Twin-Tube Technology
Fully disassemblable and serviceable
Salt spray test according to ISO 9227
Two years warranty
TÜV registration possible in-house
Technical Data Front Axle
Öhlins TTX36 Shock Absorber
Twin-Tube Technology
External Reservoir
Piston Diameter: 36 mm
Four-way adjustable damping
Spring Preload Adjustable
Special KOMO-TEC Spring Rate
Technical Data Rear Axle
Öhlins ILX36 Shock Absorber
Integrated Reservoir
Piston Diameter: 36 mm
Four-way adjustable damping
Spring Preload Adjustable
Special KOMO-TEC Main Spring Rate
Auxiliary Spring Rate: 7 N/mm
Suitable for
Lotus Exige S V6
Lotus Exige Sport 350
Lotus Exige Sport 380
Lotus Exige Sport 390 Final Edition
Lotus Exige Sport 410
Lotus Exige Sport 420
Lotus Exige Cup 360
Lotus Exige Cup 380
Lotus Exige Cup 430
Important Note for Vehicles with Standard Nitron Suspension
The following models were delivered from the factory by Lotus with Nitron shock absorbers:
Lotus Exige Sport 410
Lotus Exige Sport 420
Lotus Exige Cup 430
For the installation of the Öhlins suspension, the original Lotus top mounts are additionally required for these vehicles at the rear axle:
Lotus Top Mount B138D4025H
Lotus Top Mount B138D4026H
Please select the appropriate variant for vehicles with standard Nitron suspension when ordering. The required top mounts will only be supplied if this variant is selected.
Scope of Delivery
Öhlins Advanced Track Coilover Suspension
Front Axle Dampers with External Reservoirs
Rear axle dampers with integrated reservoirs
Springs in special KOMO-TEC tuning
Required vehicle-specific mounting parts
Hook wrench for adjusting spring preload
If choosing the Nitron variant: original Lotus dome mounts B138D4025H and B138D4026H
TÜV registration
A TÜV registration can be carried out after professional installation and technical inspection at our facility. The ability to register depends on the vehicle's condition, the specific vehicle configuration, the set vehicle height, and other installed components.
Important note
Installation and adjustment must be carried out by a qualified specialist. After installation, a complete wheel alignment as well as the adjustment of vehicle height, axle loads, and axle geometry are required.
The numerous adjustment options allow for a very precise setup, but require corresponding suspension knowledge. For optimal tuning, we recommend the basic setup and wheel alignment at our facility.