Komo-Tec KoBra-2 sports brake system for Lotus Elise and Exige – front axle 295 mm
The Komo-Tec KoBra-2 sports brake system replaces the stock brake discs on the front axle with larger, weight-reduced brake discs. The plug-and-play solution offers improved braking performance at moderate costs due to the larger disc diameter.
The brake discs are vented and slotted. They feature bolted, anodized aluminum disc pots. The stock brake calipers are retained and repositioned with the included sturdy adapter brackets. Specifically tuned PFC sport brake pads for the front axle are included.
Exclusively for the front axle. The minimum wheel size is 16 inches.
Suitable for
Version Mk1:
Lotus Elise Mk1
Lotus 340R
Lotus Exige Mk1
Version Mk2:
Lotus Elise Mk2 with Rover engine
Lotus Elise Mk2 with Toyota engine
Lotus Elise Mk3 with Toyota engine
Lotus Exige Mk2 with 192 or 220 hp
Lotus 2-Eleven with 192 or 220 hp
Please select the version that fits the vehicle.
Product details
Sport brake system for the front axle
Brake disc diameter: 295 mm
Internally ventilated and slotted brake discs
Bolted, anodized aluminum disc pots
Standard brake calipers will be reused
Adapter bracket for repositioning the brake calipers
Specifically tuned PFC sport brake pads front
Minimum rim size: 16 inches
When replacing the brake discs later, the aluminum disc pots can be reused. Only the friction rings need to be replaced.
Weight comparison
Weight per brake disc:
KoBra-2: 4.75 kg including aluminum pot and screws, rounded 4.8 kg
Standard brake disc Elise Mk1: 5.7 kg
Standard brake disc Elise Mk2: 6.0 kg
Sizing
KoBra-2 brake discs: 295 × 25 mm
Standard brake discs Elise Mk1: 282 × 26 mm
Standard brake discs Elise Mk2: 288 × 26 mm
Scope of delivery
2 × slotted, internally ventilated brake discs 295 × 25 mm
Bolted aluminum disc pots
PFC sport brake pads for the front axle
Mounting and adapter kit
TÜV registration
A TÜV registration via individual acceptance is possible in our house.
Important installation note
Installation requires technical knowledge.
The installation concerns safety-relevant brake components and must be carried out professionally according to the manufacturer's specifications. During assembly, particular attention must be paid to the correct positioning of the brake calipers and the clearance within the rims.