Lotus Exige MK3 Toyota Sport 410/Cup 430 Gearbox

Upgrade shift forks Fits to all V6 models (manual transmission) with EA60 gearbox. We optimize the shift forks and strengthen the contact surfaces to prevent wear. The relief of the gears ensures smoother shifting and thus a longer...

Lotus GKN Motorsport drive shaft for vehicles with XTRAC sequential transmission (Exige V6 Cup R, 3-Eleven Race). Price per piece, left-hand and right-hand drive are identically. Motorsportpart - Track use only - NO street use StVO/StVZO!

Komo-Tec double clutch transmission "IDS" After an intensive development period, extensive test drives and programming, we can present you our solution for a double clutch transmission in the Exige V6 called „IDS“. The Komo-Tec "IDS"...

Drexler Mechanical Limited Slip Differential for Lotus Exige V6, Evora or Emira with V6 Toyota 2GR-Engine / EA60-Transmission (Modelyear 2009ff, manual) Developed directly on track, the Drexler Mechanical Limited Slip Differential...

Quaife ATB Limited Slip Differential for Lotus Exige & Evora with V6 Toyota 2GR-Motor / EA60-Transmission (Modelljahr 2009ff, Schalter) The popular upgrade variant for the OEM differential: The Quaife Limited Slip Differential! A...

Short ratio / final drive for Lotus Exige V6 Range, Evora Range, 3-Eleven and Emira with 2GR-Powertrain with EA60-Gearbox The standard Exige S V6 gearbox ratio is basically not so bad but needs an improovement from 4. to 5. gear there is...

KT-7 Speed Sequential Manual Transmission (7-speed) Lotus uses either a manual 6-speed manual transmission, or a torque converter automation in the IPS-Spec of the Lotus Exige. In the case of ambitious driving, a major disadvantage of a...

Super lightweight flywheel for Exige S V6 , Evora and Evora S . This flywheel is designed to the relatively weak exchange coupling series designed against a superior component and reduce weight of the entire unit in the same course ....

Transmission Service XTRAC 6-speed sequential transmission XTRAC gearbox requires a service approx. Every 20 operating hours (depending on usage). Our trained employees check, clean and test all needed parts. The gearbox will then be...