Lotus Exige MK3 Toyota Sport 410/Cup 430 Engine components

No results were found for the filter!
Titanium valve spring retainer set Titanium (24 pieces) V6 2GR Titanium valve spring retainer set Titanium (24...
Titanium valve spring retainter set for V6 2GR This titanium retainer set replaces your stock steel retainers, greatly reducing valvetrain mass and allowing higher engine speeds (higher RPM) without valve float. A must for any engine...
€495.00 *
Valve Spring Set (24) V6 2GR Valve Spring Set (24) V6 2GR
Valve Springs Set for V6 2GR (24) These springs offer a significant rate increase (50%) over the stock springs without causing unnecessary friction or wear even at high mileage. Trusted by endurance racers worldwide! They work great for...
€650.00 *
Uprated valve set for 2GR V6 Uprated valve set for 2GR V6
Uprated Valve Set for 2GR V6 Manufactured to the highest standards, these valves will take just about any reasonable abuse you throw at them. Undercut, back cut, and swirl polished for maximum flow and power at all valve lifts. Intake...
€975.00 *
Lotus exchange rubber-flaps for "red Lotus baffled sump" Lotus exchange rubber-flaps for "red Lotus...
Original Lotus rubber-flaps Price per set (5 pcs.) Suitable for: all cars with Lotus factory spec "red baffled sump" (Standard at Exige V6 Cup, 3-Eleven and Evora GT)
€69.00 *
KT Forged Piston Set 2GR-V6 KT Forged Piston Set 2GR-V6
Forged Piston Set V6 The pistons are some of the most important components of an engine. High acceleration forces and the high thermal wear ensure a high force in the component itself. In order to increase the stability, we have...
€1,490.00 *
Short-Block Upgrade with Forged Pistons and Conrods V6 2GR-FE (Toyota) Short-Block Upgrade with Forged Pistons and...
FORGED - Engine Upgrade for V6 Toyota 2GR-FE (e.g. in Lotus Exige V6 Range, Lotus Evora Range, Lotus 3-Eleven) Especially suitable to improve the stability of engines with increased performance! In the various variants, we offer you the...
From €3,999.00 *
Cylinder head modification phase 1 (V6-2GR) Cylinder head modification phase 1 (V6-2GR)
Cylinder head machining stage 1 V6 2GR engine of Exige V6 (MY2012-today), Evora (MY2009-today), 3-Eleven In order to give the 2GR engine in the Lotus V6 models more power, it was necessary to optimize the restrictive original cylinder...
From €1,990.00 *
Short Block V6-Toyota 2GR-FE Short Block V6-Toyota 2GR-FE
New short block for V6-Toyota 2GR-FE. Complete with crankshaft, Pistons, and con rods, no oil pump. Fits all Cars with Toyota 2GR engine, NA and SC. The oil cooler must be replaced after engine damage; any liability for consequential...
€4,990.00 *
Forged Connecting Rods Set 2GR-V6 Forged Connecting Rods Set 2GR-V6
Forged connecting rods V6 The connecting rod is the connecting link between the piston and the crankshaft. When the engine power is increased, the requirement for the connecting rod also increases considerably. To reduce forces, we use...
€1,160.00 *
Moroso Alloy baffled oil pan Exige S V6/ Evora Moroso Alloy baffled oil pan Exige S V6/ Evora
Moroso Alloy baffled oil pan 2GR-V6 The alloy oil pan for the 3.5l-6Zyl.-2GR-FE Toyota Powertrain has a special valve design to prevent oil spill especially in long curves and at high cornering speeds. In addition, this oil pan has an...
€759.00 *
Headgasket V6 (2 pieces) Headgasket V6 (2 pieces)
Headgasket-Kit V6 2GR-Powertrain Kit: 1x LH and 1x RH
€225.00 *
Viewed